High Efficiency Filtration
Stable efficiency filtration with two-layer filtration film made of PTFE causing little stretches by aging or vibration. 0.003μm particle capture test conducted by nucleus particle counter for all products.
Low Pressure Loss
High flow rate and low pressure loss by PTFE’s two-layer structure and high hole rate. Much lower pressure loss especially for STF-4 series by large effective filtration area from film laminate structure.
High Corrosion Resistance
Fluorine resin used for element film, element support, O-ring etc., while SUS316L used for housing and every gas contacting part polished to R max 0.5μm and passivation process.
|Recommended Flow Rate||40 to 300ℓ/min(refer to flow rate characteristic curve for each model)|
|Max. Operating Pressure||0.98MPa(142PSIG)at20℃|
|Max. Allowable Differential Pressure||0.5MPa(72.5PSIG)at20℃|
|Back Pressure Resistance||0.07MPa(10.15PSIG)at20℃|
|Max. Operating Temperature||120℃|
|External Leakage||2×10-11Pa・m3/sec or less|
Roughness: Rmax0.5μm or less
Element support: PFA/ECTFE (STF-4 only)
Element support: P.P (STF-7,8 only)
|Joint||1/4”, 3/8”, 1/2”, 3/4” (STF-7,8 only) Gasket seal, Compression seal, Straight tube, and others|
RADIC Technologies, Inc.
1922 The Alameda, Suite 216 San Jose, CA 95126
Phone: +1 408-263-6500 Fax:+1 408-273-6960
Copyright © 2003-2014 RADIC Technologies Inc.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany